Electro-Voice RE20 Broadcast Announcer Microphone Broadcasting Bundle

Special Special Price $599.99 You Save $61.95 Originally $661.94
PA SKU # WB EV RE20BB MFR # RE20 BROADCASTING BUNDLE UPC # 800549414463
  • Support Lifetime Tech Support
  • Best Seller Best Seller!
  • Question Ask a Question
Only 1 Left! — In Stock & Ready to Ship Order now! Limited quantity in stock! Most orders placed before 3pm MST ship same day (except weekends and holidays).
  • Product Highlights
  • Exclusive Savings Bundle!
  • 1x Electro-Voice RE20 Microphone
  • 1x sE Electronics DM1 Dynamite Preamp
  • 1x Horizon NM1-10 Microphone Cable (10')
  • 1x Rode PSA1 Studio Boom Arm
  • Great Broadcasting/Podcasting Mic Setup!

Electro-Voice RE20 Broadcast Microphone with Dynamite Preamp, Studio Boom and Cable!

Electro-Voice RE20 Broadcast Announcer Microphone with Variable-D

The RE20 dynamic cardioid microphone is truly an industry standard, a firm favorite among broadcasters and sound engineers worldwide. Its popularity also extends into music production as a premium grade instrument microphone. Its Variable-D design and heavy-duty internal pop filter excel for close-in voice work, while an internal element shock-mount reduces vibration-induced noise.

RE20 Includes stand adapter, 2-year warranty.

sE Electronics DM1 Dynamite Inline Preamp

The DM1 DYNAMITE: explosive level for all your passive mics.

Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound.

With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier.

Whether you're a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp - all without adding noise or coloration. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.

For optimum results, we recommend you plug the DM1 directly into your microphone's output. If necessary, a cable can be used between the microphone and the DM1 - but the shorter the cable, the better the overall performance will be.

Horizon NM1-10 Microphone Cable with Neutrik XLR Connectors (10 Foot)

The RapcoHorizon 10 Foot XLR Male to XLR Female cable is made from a dual conductor 24 gauge copper cable utilizing a spiral copper shielding. In addition it features Neutrik NC3FXX and NC3MXX style Nickel connectors with the use of silver contact pins. This 10ft length is commonly recommended with any pro audio applications that will need a patch from one particular component to another one. It'll give you a tough and reliable connection all the while sustaining the purity of the audio signal.

This series uses (2) 24 gauge bare copper center conductors and a serve shield for quiet operation. The outer jacket is a durable and flexible matte PVC compound. Available with alternate choices of connector brands to meet different preferences and price points.

Available in black, blue, green, purple, red, and white. Neon colors available are neon blue, neon green, neon orange, neon pink, and neon yellow.

Common lengths (in feet): 1, 2, 3, 6, 10, 15, 20, 25, 30, 50, 75, 100. Other lengths available upon request.

Rode PSA1 Studio Boom Arm

The PSA1 is a studio boom arm for radio, broadcast, studio and home use.It provides full 360 degree rotation.

The PSA1 has a horizontal reach of 820mm, and a vertical reach of 840mm. It is supplied with velcro cable wraps and both desk-clamp and desk-insert style attachments for verstile mounting in desks up to 55mm thick (clamp) or 70mm (insert).

Designed for the Rode Procaster and Podcaster, the PSA1 supports most microphones weighing between 700g (1.5lb) and 1.1kg (2.4lb) when combined with shock mount.

Please note that the PSM1 shock mount is sold separately.

  • Electro-Voice RE20 Broadcast Announcer Microphone with Variable-D
  • Variable-D for minimal proximity effect
  • True cardioid with no coloration at 180-degrees off-axis
  • Voice tailored frequency response
  • Studio condenser-like performance
  • Large diaphragm
  • Humbucking coil
  • Bass roll-off switch
  • sE Electronics DM1 Dynamite Inline Preamp
  • +28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD
  • designed for neutral, balanced sound quality
  • the perfect way to boost the signal of a passive microphone
  • gain stays consistent regardless of connected load
  • provides significantly improved level to your mic preamp for proper gain staging
  • SOPHISTICATED CLASS-A ELECTRONICS
  • state of the art electronics and high-grade FETs provide supremely low noise
  • transformerless design for pristine sound quality
  • provides the lowest noise in its class
  • DEDICATED OUTPUT BUFFER AMPLIFIER
  • provides +28dB output independent of load impedance or cable length
  • extremely low output impedance
  • drives long cable runs and can reduce susceptibility to RF interference, buzz & hum
  • SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH
  • efficient rejection of any electrical interference and noise
  • high-quality finish ensures a great look for many years
  • slim design allows for easy placement in the studio or on stage
  • GOLD-PLATED XLR CONNECTOR
  • for loss-free and reliable signal connection
  • Horizon NM1-10 Microphone Cable with Neutrik XLR Connectors (10 Foot)
  • (2) 24 gauge center conductors
  • Utilizing a serve shield process for quiet operation yielding maximum flexibility
  • Matte jacket PVC material is very flexible yet durable with very low memory
  • Pure copper conductor and shield
  • Connector brand options available to meet various preferences and price points: RapcoHorizon, Amphenol, Neutrik, or Switchcraft
  • Individually tested for performance and quality
  • Rode PSA1 Studio Boom Arm
  • Includes 3/8" adapter
  • 32" (820mm) Horizontal Reach
  • 33" (840mm) Vertical Reach
  • Holds up to 4.4 lbs (2 kg)
  • Includes two desk mounting options
  • Dual-axis swivel mount for accurate positioning
  • Electro-Voice RE20 Broadcast Announcer Microphone with Variable-D
  • Case Material: Steel
  • Connector Type: 3-pin XLR
  • Diameter (Max): 2.13" (54 mm)
  • Element: Dynamic
  • Finish: Fawn Beige
  • Frequency Response: 45 - 18,000 Hz
  • Impedance, Low-Z balanced: 150 Ω
  • Mic Type: Vocal/Instrument
  • Open Circuit Voltage: 1.5 mV/Pascal
  • Polar Pattern: Cardioid
  • Power Requirement: Passive
  • Height: 8.54" (217 mm)
  • Weight Net: 26 oz (737 g)
  • sE Electronics DM1 Dynamite Inline Preamp
  • Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB)
  • Gain: 28 dB (load 1kOhms)
  • Max output level (0.5% THD): 8.3 dBV (2.6 V)
  • Output noise level: 9 μV (JIS-A)
  • Powering: 48 Volts according toIEC 61938
  • Electrical impedance: 135 Ohms
  • Recommended load impedance: >1k Ohms
  • Current consumption: 3.0 mA
  • Connectivity: 3-pin male/female XLR connector
  • Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.)
  • Weight: 80 g (2.82 oz.)
  • Horizon NM1-10 Microphone Cable with Neutrik XLR Connectors (10 Foot)
  • Cable: MIC1.K
  • Conductor Gauge: (2)24 gauge
  • Shield: Bare annealed copper serve
  • Shield Coverage: 95%
  • Jacket: Matte PVC
  • O.D.: 0.230"
  • Capacitance: 21 pF/ft. @ 1 kHz
  • Cond.-Shield Capacitance: 37 pF/ft. @ 1 kHz
  • Characteristic Impedance: 70Ω NOMINAL
  • D.C. Resistance @ 20°C: 23Ω/1000'
  • (1) Electro-Voice RE20 Broadcast Announcer Microphone with Variable-D
  • (1) sE Electronics DM1 Dynamite Inline Preamp
  • (1) Horizon NM1-10 Microphone Cable with Neutrik XLR Connectors (10 Foot)
  • (1) Rode PSA1 Studio Boom Arm
Write Your Own Review
You're reviewing:Electro-Voice RE20 Broadcast Announcer Microphone Broadcasting Bundle
Your Rating